IES-1000 User’s Guide

5.7.3Syslog Server Command

Syntax:

192.168.1.1 sys> syslog server <server IP>

where

<server IP> =

The IP address of syslog server.

This command sets the UNIX server IP address. If <server IP>=0.0.0.0 (default), then logs will be dropped (not be sent).

5.8System Error Log Commands

The system error log will record error events locally to the IES-1000 memory. You may clear or display these logs using the commands listed in this section.

The following lists what logs the system error log can record.

ADSL link on (port number, sequence number, rate,

ADSL link down (port number, sequence number, noise

noise margin, attenuation)

margin, attenuation)

ADSL OVER_HEAT_ACTIVE (temperature)

ADSL OVER_HEAT_RELEASE (temperature)

G.SHDSL link on (port number, sequence number,

G.SHDSL link down (port number, sequence number,

rate, noise margin, attenuation)

noise margin, attenuation)

G.SHDSL OVER_HEAT_ACTIVE (temperature)

G.SHDSL OVER_HEAT_RELEASE (temperature)

Console session begin

Console session end

Telnet session begin

Telnet session end

Incorrect telnet password

Insecure telnet access (IP address)

FTP session begin

FTP session end

Incorrect FTP password

Insecure FTP access (IP address)

FTP image error (reason)

FTP receive file OK (file name)

System reboot

 

5.8.1Errlog Display Command

Syntax:

192.168.1.1 sys> errlog display

This command displays the system error log.

5.8.2Errlog Clear Command

Syntax:

192.168.1.1 sys> errlog clear

System Commands

5-7