IES-1000 User’s Guide

Down/up stream Depth value

:

2/ 2

Total Transceiver Output Power

:

8dB

Current ATUR Information:

 

 

Country code 0

 

 

Provider Code 01020304

 

 

Capabilities:

 

 

g.dmt POTS overlap (Annex A)

 

 

The results contain the operating modes, interleave delay, parity byte assignment and parity bytes per codeword, symbols per codeword and interleave depth. Current ATUR Information contains data acquired from the ATUR (stands for ADSL Termination Unit – Remote, in this case the subscriber’s ADSL modem or router) during negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained from Vendor ID fields (g.994.1) or R-MSGS1(T1.413) and country code from Vendor ID (g.994.1).

Information obtained prior to training to steady state transition will not be valid or will be old information. Annex A refers to POTS.

7.5.8Lineperf Command

Syntax:

192.168.1.1 adsl> lineperf <port number>

where

<port number> = A port number, from 1 to 8.

The lineperf command shows the line performance counters of an ADSL port.

An example is shown next.

192.168.1.1 adsl> lineperf 7

nfebe-I/nfebe-ni: 0/0

ncrc-I/ncrc-ni: 0/0

nfecc-I/nfecc-ni: 0/0

nfec-I/nfec-ni: 0/0

nblks-ds/nblks-us: 120878/120878

nsec-ds/nsec-us: 2060/2060

n-eb-ds/n-eb-us: 0/0

n-bbe-ds/n-bbe-us: 0/0

n-es-ds/n-es-us: 0/0

n-ses-ds/n-ses-us: 0/0

7-6

ADSL Commands