ZyWALL 10/50 Internet Security Gateway

12.2 Enabling the Firewall

Click Advanced, Firewall, Configuration and then the Config tab. Enable (or activate) the firewall by clicking the Firewall Enabled check box as seen in the following screen.

Figure 12-1 Enabling the Firewall

12.3 E-mail

The E-mail screen show next, allows you to specify your mail server, where e-mail alerts should be sent as well as when and how often they should be sent.

12.3.1 Alerts

Alerts are reports on events, such as attacks, that you may want to know about right away. You can choose to generate an alert when an attack is detected in the Attack Alert screen (Figure 12-4 - check the Generate alert when attack detected checkbox) or when a rule is matched in the Rule Config screen (see Figure

12-2

Using the ZyWALL Web Configurator