ZyWALL 10/50 Internet Security Gateway

Menu 3.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 5-7 Menu 3.2.1 — IP Alias Setup

Use the instructions in the following table to configure IP Alias parameters.

Table 5-5 IP Alias Setup Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

IP Alias

Choose Yes to configure the LAN network for the ZyWALL.

Yes

 

 

 

IP Address

Enter the IP address of your ZyWALL in dotted decimal notation.

192.168.2.1

 

 

 

IP Subnet Mask

Your ZyWALL will automatically calculate the subnet mask based on

255.255.255.0

 

the IP address that you assign. Unless you are implementing

 

 

subnetting, use the subnet mask computed by the ZyWALL.

 

 

 

 

RIP Direction

Press [SPACE BAR] to select the RIP direction. Options are:

None

 

Both, In Only, Out Only or None.

 

Version

Press [SPACE BAR] to select the RIP version. Options are:

RIP-1

 

RIP-1,RIP-2B or RIP-2M.

 

Incoming

Enter the filter set(s) you wish to apply to the incoming traffic

1

Protocol Filters

between this node and the ZyWALL.

 

Outgoing

Enter the filter set(s) you wish to apply to the outgoing traffic between

2

Protocol Filters

this node and the ZyWALL.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

5-8

LAN Setup