ZyWALL 10/50 Internet Security Gateway

Chapter 6

Internet Access

This chapter shows you how to configure your ZyWALL for Internet access.

6.1Internet Access Setup

You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation.

6.1.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice is for a dial-up connection using PPPoE. If you choose Ethernet in menu 4 you will see the next screen.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Login Server IP= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 6-1 Menu 4 — Internet Access Setup (Ethernet)

The following table describes this screen.

 

Table 6-1 Internet Access Setup Menu Fields

FIELD

 

DESCRIPTION

 

 

 

ISP’s Name

 

Enter the name of your Internet Service Provider, e.g., myISP. This

 

 

information is for identification purposes only.

Internet Access

6-1