ZyWALL 10/50 Internet Security Gateway

7.2Editing TCP/IP Options (with Ethernet Encapsulation)

Move the cursor to the Edit IP field in menu 11.1, press [SPACE BAR] to select Yes. Press [ENTER] to

open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Metric= N/A

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle

Figure 7-4 Menu 11.3 — Remote Node Network Layer Options

The next table gives you instructions about configuring remote node network layer options.

Table 7-4 Remote Node Network Layer Options Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

IP Address

If your ISP did not assign you an explicit IP address, select Dynamic;

Dynamic

Assignment

otherwise select Static and enter the IP address & subnet mask in the

 

 

following fields.

 

 

 

 

IP Address

If you have a Static IP Assignment, enter the IP address assigned to you

 

 

by your ISP.

 

 

 

 

IP Subnet

If you have a Static IP Assignment, enter the subnet mask assigned to

 

Mask

you.

 

 

 

 

Gateway IP

If you have a Static IP Assignment, enter the gateway IP address

 

Addr

assigned to you.

 

Network

Use [SPACE BAR] to select either Full Feature, None or SUA Only. See

SUA Only

Address

the NAT chapter for a full discussion on this feature.

 

Translation

 

 

Remote Node Setup

7-7