ZyWALL 10/50 Internet Security Gateway

Table 9-5 Fields in Menu 15.1.1

 

FIELD

DESCRIPTION

EXAMPLE

 

 

 

 

 

Action

The default is None. Edit means you want to edit a selected rule

Edit

 

 

(see following field). Insert Before means to insert a rule before

 

 

 

 

the rule selected. The rules after the selected rule will then be

 

 

 

 

moved down by one rule. Delete means to delete the selected rule

 

 

 

 

and then all the rules after the selected one will be advanced one

 

 

 

 

rule. None disables the Select Rule item.

 

 

Select Rule

When you choose Edit, Insert Before or Delete in the previous

1

 

 

 

field the cursor jumps to this field to allow you to select the rule to

 

 

 

 

apply the action in question.

 

 

 

 

 

 

 

 

 

 

 

 

You must press [ENTER] at the bottom of the screen to save the whole set. You must

do this again if you make any changes to the set – including deleting a rule. No

changes to the set take place until this action is taken.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and

Global Start/End IPs.

An End IP address must be numerically greater than its corresponding IP Start

address.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 9-9 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set

9-12

NAT