ZyWALL 10/50 Internet Security Gateway

Table 7-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Authen

This field sets the authentication protocol used for outgoing

CHAP/PAP

 

calls.

 

 

Options for this field are:

 

 

CHAP/PAP - Your ZyWALL will accept either CHAP or PAP

 

 

when requested by this remote node.

 

 

CHAP - accept CHAP only.

 

 

PAP - accept PAP only.

 

 

 

 

Telco Option

 

 

Allocated Budget

The field sets a ceiling for outgoing call time for this remote

10

 

node. The default for this field is 0 meaning no budget control.

 

Period(hr)

This field is the time period that the budget should be reset. For

1

 

example, if we are allowed to call this remote node for a

 

 

maximum of 10 minutes every hour, then the Allocated

 

 

Budget is (10 minutes) and the Period(hr) is 1 (hour).

 

Schedules

You can apply up to four schedule sets here. For more details

 

 

please refer to the Call Schedule Setup chapter.

 

Nailed-Up

This field specifies if you want to make the connection to this

 

Connection

remote node a nailed-up connection. More details are given

 

 

earlier in this section.

 

 

 

 

Session Options

This value specifies the idle time (i.e., the length of time there

100 seconds

Idle Timeout

is no traffic from the ZyWALL to the remote node) in seconds

(default)

that can elapse before the ZyWALL automatically disconnects

 

 

 

 

the PPPoE connection. This option only applies when the

 

 

ZyWALL initiates the call.

 

7.1.3 PPTP Encapsulation

If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the Appendices for information on PPTP.

Remote Node Setup

7-5