|
|
| ZyWALL 10/50 Internet Security Gateway |
|
| Table | |
|
|
|
|
| FIELD |
| DESCRIPTION |
|
|
|
|
| Tx B/s |
| Shows the transmission speed in Bytes per second on this port. |
|
|
|
|
| Rx B/s |
| Shows the reception speed in Bytes per second on this port. |
|
|
|
|
| Up Time |
| Total amount of time the line has been up. |
|
|
|
|
| Ethernet Address |
| The Ethernet address of the port listed on the left. |
|
|
|
|
| IP Address |
| The IP address of the port listed on the left. |
|
|
|
|
| IP Mask |
| The IP mask of the port listed on the left. |
|
|
|
|
| DHCP |
| The DHCP setting of the port listed on the left. |
|
|
|
|
| System up Time |
| The total time the ZyWALL has been on. |
|
|
|
|
| Name |
| This is the ZyWALL's system name + domain name assigned in menu 1. e.g., |
|
|
| System Name= xxx; Domain Name= baboo.mickey.com. |
|
|
| Name= xxx.baboo.mickey.com |
|
|
|
|
| Routing |
| This field refers to the routing protocol used. |
|
|
|
|
| ZyNOS F/W Version |
| The ZyNOS Firmware version and the date created. |
|
|
| |
| You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24. | ||
|
|
|
|
20.2 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the System Information and Console Port Speed:
Step 1. Enter 24 to go to Menu 24 – System Maintenance.Step 2. Enter 2 to open Menu 24.2 - System Information and Console Port Speed. Step 3. From this menu you have two choices as shown in the next figure:
System Information & Diagnosis |