ZyXEL Communications 10, 50 Table 7-3Fields in Menu 11.1 (PPTP Encapsulation), Figure 7-3Menu 11.1 — Remote Node Profile for PPTP Encapsulation

ZyWALL 10/50 Internet Security Gateway

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe	Route= IP
Active= Yes
Encapsulation= PPTP	Edit IP= No
Service Type= Standard	Telco Option:
Service Name=N/A	Allocated Budget(min)= 0
Outgoing=	Period(hr)= 0
My Login=	Schedules=
My Password= ********	Nailed-up Connections= No
Authen= CHAP/PAP	Session Options:
PPTP :
	Edit Filter Sets= No
My IP Addr=	Idle Timeout(sec)= 100
Server IP Addr=
Connection ID/Name=

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 7-3 Menu 11.1 — Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in menu 11.1 not previously discussed above.

Table 7-3 Fields in Menu 11.1 (PPTP Encapsulation)

FIELD	DESCRIPTION	EXAMPLE
Encapsulation	Toggle the space bar to choose PPTP. You must also go to menu	PPTP
	11.3 to check the IP Address setting once you have selected the
	encapsulation method.
My IP Addr	Enter the IP address of the WAN Ethernet port.	10.0.0.140
My Server IP	Enter the IP address of the ANT modem.	10.0.0.138
Addr
Connection	Enter the connection ID or connection name in the ANT. It must	n:My ISP
ID/Name	follow the “c:id” and “n:name” format.
	This field is optional and depends on the requirements of your xDSL
	Modem.
Schedules	You can apply up to four schedule sets here. For more details
	please refer to the Call Schedule Setup chapter.
Nailed-Up	Press [SPACE BAR] and then [ENTER] to select Yes if you want to	No
Connections	make the connection to this remote node a nailed-up connection.

7-6 Remote Node Setup