ZyWALL 10/50 Internet Security Gateway
you have uploaded the correct firmware version. The AT command is the command you enter after you press “y” when prompted in the SMT menu to go into debug mode.
TableFILE TYPE | INTERNAL | EXTERNAL NAME | DESCRIPTION |
| NAME |
|
|
|
|
|
|
Configuration | *.rom | This is the configuration filename on the | |
File |
|
| ZyWALL. Uploading the |
|
|
| the entire ROM file system, including your |
|
|
| ZyWALL configurations, |
|
|
| (including the default password), the error |
|
|
| log and the trace log. |
|
|
|
|
Firmware | Ras | *.bin | This is the generic name for the ZyNOS |
|
|
| firmware on the ZyWALL. |
21.2 Backup Configuration
The ZyWALL displays different messages explaining different ways to backup, restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2; depending on whether you use the console port or Telnet.
Option 5 from Menu 24 - System Maintenance allows you to backup the current ZyWALL configuration to your computer. Backup is highly recommended once your ZyWALL is functioning properly. FTP is the preferred methods for backing up your current configuration to your computer since it is faster. You can also perform backup and restore using menu 24 through the console port. Any serial communications program should work fine; however, you must use Xmodem protocol to perform the download/upload and you don’t have to rename the files (see section 21.1).
Please note that terms “download” and “upload” are relative to the computer. Download means to transfer from the ZyWALL to the computer, while upload means from your computer to the ZyWALL.
21.2.1 Backup Configuration
Follow the instructions as shown in the next screen.
Firmware and Configuration File Maintenance |