ZyXEL Communications 10, 50 Figure 7-6Menu 11.5 — Remote Node Filter (Ethernet Encapsulation), Figure 7-7Menu 11.5 — Remote Node Filter (PPPoE or PPTP Encapsulation)

ZyWALL 10/50 Internet Security Gateway

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the ZyWALL to prevent certain packets from triggering calls. You can specify up to 4 filter sets separated by commas, e.g., 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field. For more information on defining the filters, please refer to the Filters chapter. For PPPoE or PPTP encapsulation, you can also specify remote node call filter sets.

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 1

device filters= Output Filter Sets:

protocol filters= 1

device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-6 Menu 11.5 — Remote Node Filter (Ethernet Encapsulation)

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 1

Device filters= Output Filter Sets:

protocol filters= 1

device filters= Call Filter Sets:

protocol filters= 1

Device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-7 Menu 11.5 — Remote Node Filter (PPPoE or PPTP Encapsulation)

Remote Node Setup 7-11