ZyWALL 10/50 Internet Security Gateway

FUNCTIONCOMMAND

config edit firewall set <set #> rule <rule #> TCP destport-range <start port #> <end port #>

config edit firewall set <set #> rule <rule #> UDP destport-single <port #>

config edit firewall set <set #> rule <rule #> UDP destport-range <start port #> <end port #>

Delete

config delete firewall e-mail

config delete firewall attack

config delete firewall set <set #>

config delete firewall set <set #> rule

<rule #>

DESCRIPTION

This command sets a rule to have the ZyWALL check for TCP traffic with a destination port in this range.

This command sets a rule to have the ZyWALL check for UDP traffic with this destination address. You may repeat this command to enter various, non-consecutive port numbers.

This command sets a rule to have the ZyWALL check for UDP traffic with a destination port in this range.

This command removes all of the settings for e-mail alert.

This command resets all of the attack response settings to their defaults.

This command removes the specified set from the firewall configuration.

This command removes the specified rule in a firewall configuration set.

V

Firewall Commands