ZyWALL 10/50 Internet Security Gateway
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version=
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
First address in the IP Pool
Size of the IP Pool
IP addresses of the DNS servers
Follow the instructions in the next table on how to configure the DHCP fields.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
DHCP | This field enables/disables the DHCP server. | Server |
| If set to Server, your ZyWALL will act as a DHCP server. |
|
| If set to None, the DHCP server will be disabled. |
|
| If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays |
|
| requests and responses between the remote server and the clients. |
|
| When set to Server, the following four items need to be set: |
|
|
|
|
Configuration: |
|
|
Client IP Pool | This field specifies the first of the contiguous addresses in the IP address | 192.168.1.33 |
Starting Address | pool. |
|
Size of Client IP | This field specifies the size, or count of the IP address pool. | 32 |
Pool |
|
|
Primary DNS | Type in the IP addresses of the DNS servers. The DNS servers are passed |
|
Server | to the DHCP clients along with the IP address and the subnet mask. |
|
Secondary DNS |
|
|
Server |
|
|
|
|
|
LAN Setup |