ZyWALL 10/50 Internet Security Gateway

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Host= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 19-2 Menu 22 — SNMP Configuration

The following table describes the SNMP configuration parameters.

Table 19-2 SNMP Configuration Menu Fields

FIELD

DESCRIPTION

DEFAULT

 

 

 

Get

Enter the Get Community, which is the password for the incoming Get-

public

Community

and GetNext- requests from the management station.

(default)

Set Community

Enter the Set Community, which is the password for incoming Set-

public

 

requests from the management station.

(default)

Trusted Host

If you enter a trusted host, your ZyWALL will only respond to SNMP

0.0.0.0

 

messages from this address. If you leave the field set to 0.0.0.0

(default)

 

(default), your ZyWALL will respond to all SNMP messages it receives,

 

 

regardless of source.

 

 

 

 

Trap:

Enter the trap community, which is the password sent with each trap to

public

Community

the SNMP manager.

(default)

Trap:

Enter the IP address of the station to send your SNMP traps to.

0.0.0.0

Destination

 

(default)

 

 

 

Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the message “Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel.

19-4

SNMP