ZyWALL 10/50 Internet Security Gateway

Table 7-5 Remote Node Network Layer Options Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Metric

The metric represents the “cost” of transmission for routing purposes.

1 to 15

 

IP routing uses hop count as the measurement of cost, with a

 

 

minimum of 1 for directly connected networks. Enter a number that

 

 

approximates the cost for this link. The number need not be precise,

 

 

but it must be between 1 and 15. In practice, 2 or 3 is usually a good

 

 

number.

 

 

 

 

Private

This parameter determines if the ZyWALL will include the route to

Yes

 

this remote node in its RIP broadcasts. If set to Yes, this route is kept

 

 

private and not included in RIP broadcast. If No, the route to this

 

 

remote node will be propagated to other hosts through RIP

 

 

broadcasts.

 

RIP

Press [SPACE BAR] to select the RIP direction from Both/ None/In

None

 

Only/Out Only and None.

(default)

Version

Press [SPACE BAR] to select the RIP version from RIP-1/RIP-

RIP-1

 

2B/RIP-2M.

 

Multicast

IGMP (Internet Group Multicast Protocol) is a session-layer protocol

None

 

used to establish membership in a Multicast group. The ZyWALL

 

 

supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).

 

 

Press the [SPACE BAR] to enable IP Multicasting or select None to

 

 

disable it. See the previous Part for more information on this feature.

 

Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to menu 11. Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.

7.2.2 Editing TCP/IP Options (with PPPoE Encapsulation)

Make sure Encapsulation is set to PPPoE in menu 11.1. Move the cursor to the Edit IP field in Menu

11.1and press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.3 - Network Layer Options. The menu and fields are the same as described for PPTP encapsulation above.

7.3Remote Node Filter

Move the cursor to the field Edit Filter Sets in menu 11.1, then press [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.

7-10

Remote Node Setup