Chapter 9 VLAN
Table 20 | Port Based VLAN Setup (continued) | |
label |
| Description |
|
|
|
Outgoing |
| These are the egress ports; an egress port is an outgoing port, that is, a |
|
| port through which a data packet leaves. If you wish to allow two |
|
| subscriber ports to talk to each other, you must define the egress port for |
|
| both ports. CPU refers to the Switch management port. By default it forms |
|
| a VLAN with all Ethernet ports. If it does not form a VLAN with a particular |
|
| port then the Switch cannot be managed from that port. |
|
|
|
Apply |
| Click Apply to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the |
|
| Save link on the top navigation panel to save your changes to the non- |
|
| volatile memory when you are done configuring. |
|
|
|
Cancel |
| Click Cancel to begin configuring this screen afresh. |
|
|
|
114 |
| |
| ||
|
|
|