Chapter 8 Basic Setting
8.7 Port Setup
Use this screen to configure Switch port settings.Click Basic Setting > Port Setup in the navigation panel to display the configuration screen.
Figure 46 Basic Setting > Port Setup
The following table describes the labels in this screen.
Table 12 Basic Setting > Port Setup
LABEL | DESCRIPTION |
Port | This is the port index number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. |
| Use this row first to set the common settings and then make adjustments |
| on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Active | Select this check box to enable a port. The factory default for all ports is |
| enabled. A port must be enabled for data transmission to occur. |
|
|
Name | Enter a descriptive name that identifies this port. You can enter up to 64 |
|
| Note: Due to space limitation, the port name may be truncated in |
| some web configurator screens. |
|
|
Type | This field displays 10/100/1000M for Gigabit connections. |
| 91 |
|
|