|
| Chapter 5 The Web Configurator |
| Table 5 Navigation Panel Links (continued) | |
| LINK | DESCRIPTION |
| VLAN Stacking | This link takes you to screens where you can configure VLAN stacking |
|
| which helps to distinguish multiple customers VLANs. |
|
|
|
| Multicast | This link takes you to screens where you can configure various multicast |
|
| features, IGMP snooping and create multicast VLANs. |
|
|
|
| AAA | This link takes you to a screen where you can configure authentication, |
|
| authorization and accounting services via external servers. The external |
|
| servers can be either RADIUS (Remote Authentication |
|
| Service) or TACACS+ (Terminal Access Controller |
|
| Plus). |
|
|
|
| IP Source | This link takes you to screens where you can configure filtering of |
| Guard | unauthorized DHCP and ARP packets in your network. |
|
|
|
| Loop Guard | This link takes you to a screen where you can configure protection |
|
| against network loops that occur on the edge of your network. |
|
|
|
| VLAN Mapping | This link takes you to screens where you can configure VLAN mapping |
|
| settings on the Switch. |
|
|
|
| Layer 2 | This link takes you to a screen where you can configure L2PT (Layer 2 |
| Protocol | Protocol Tunneling) settings on the Switch. |
| Tunneling |
|
|
|
|
| IP Application |
|
|
|
|
| Static Routing | This link takes you to a screen where you can configure static routes. A |
|
| static route defines how the Switch should forward traffic by configuring |
|
| the TCP/IP parameters manually. |
|
|
|
| DiffServ | This link takes you to screens where you can enable DiffServ, configure |
|
| Two Rate Three Color Marker settings and set |
|
| mappings. |
|
|
|
| DHCP | This link takes you to screens where you can configure the DHCP |
|
| settings. |
|
|
|
| Management |
|
|
|
|
| Maintenance | This link takes you to screens where you can perform firmware and |
|
| configuration file maintenance as well as reboot the system. |
|
|
|
| Access Control | This link takes you to screens where you can change the system login |
|
| password and configure SNMP and remote management. |
|
|
|
| Diagnostic | This link takes you to a screen where you can view system logs and test |
|
| port(s). |
|
|
|
| Syslog | This link takes you to screens where you can setup system logs and a |
|
| system log server. |
|
|
|
| Cluster | This link takes you to screens where you can configure clustering |
| Management | management and view its status. |
|
|
|
| MAC Table | This link takes you to a screen where you can view the MAC addresses |
|
| (and types) of devices attached to what ports and VLAN IDs. |
|
|
|
| ARP Table | This link takes you to a screen where you can view the MAC addresses – |
|
| IP address resolution table. |
|
|
|
| Configure | This link takes you to a screen where you can copy attributes of one port |
| Clone | to other ports. |
|
|
|
| 61 |
|
|