![](/images/backgrounds/126522/126522-38276x1.png)
Chapter 7 System Status and Port Statistics
Table 7 Status: Port Details (continued)
LABEL | DESCRIPTION |
Status | If STP (Spanning Tree Protocol) is enabled, this field displays the STP state |
| of the port (see Section 13.1 on page 125 for more information). |
| If STP is disabled, this field displays FORWARDING if the link is up, |
| otherwise, it displays STOP. |
|
|
LACP | This field shows if LACP is enabled on this port or not. |
|
|
TxPkts | This field shows the number of transmitted frames on this port |
|
|
RxPkts | This field shows the number of received frames on this port |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Tx KB/s | This field shows the number kilobytes per second transmitted on this port. |
|
|
Rx KB/s | This field shows the number of kilobytes per second received on this port. |
|
|
Up Time | This field shows the total amount of time the connection has been up. |
|
|
Tx Packet |
|
The following fields display detailed information about packets transmitted. | |
|
|
TX Packet | This field shows the number of good packets (unicast, multicast and |
| broadcast) transmitted. |
|
|
Multicast | This field shows the number of good multicast packets transmitted. |
|
|
Broadcas | This field shows the number of good broadcast packets transmitted. |
t |
|
|
|
Pause | This field shows the number of 802.3x Pause packets transmitted. |
|
|
Tagged | This field shows the number of packets with VLAN tags transmitted. |
|
|
Rx Packet |
|
The following fields display detailed information about packets received. | |
|
|
RX | This field shows the number of good packets (unicast, multicast and |
Packet | broadcast) received. |
|
|
Multicast | This field shows the number of good multicast packets received. |
|
|
Broadcas | This field shows the number of good broadcast packets received. |
t |
|
|
|
Pause | This field shows the number of 802.3x Pause packets received. |
|
|
Control | This field shows the number of control packets received (including those |
| with CRC error) but it does not include the 802.3x Pause packets. |
|
|
TX Collision |
|
The following fields display information on collisions while transmitting. | |
|
|
Single | This is a count of successfully transmitted packets for which transmission is |
| inhibited by exactly one collision. |
|
|
Multiple | This is a count of successfully transmitted packets for which transmission |
| was inhibited by more than one collision. |
|
|
Excessiv | This is a count of packets for which transmission failed due to excessive |
e | collisions. Excessive collision is defined as the number of maximum |
| collisions before the retransmission count is reset. |
|
|
Late | This is the number of times a late collision is detected, that is, after 512 |
| bits of the packets have already been transmitted. |
|
|
76 |
| |
| ||
|
|
|