Chapter 37 Cluster Management

37.3 Clustering Management Configuration

Use this screen to configure clustering management. Click Management > Cluster Management > Configuration to display the next screen.

Figure 190 Management > Cluster Management > Configuration

The following table describes the labels in this screen.

Table 120 Management > Cluster Management > Configuration

LABEL

DESCRIPTION

Clustering

 

Manager

 

 

 

Active

Select Active to have this Switch become the cluster manager switch.

 

A cluster can only have one manager. Other (directly connected)

 

switches that are set to be cluster managers will not be visible in the

 

Clustering Candidates list. If a switch that was previously a cluster

 

member is later set to become a cluster manager, then its Status is

 

displayed as Error in the Cluster Management Status screen and a

 

warning icon ( ) appears in the member summary list below.

 

 

Name

Type a name to identify the Clustering Manager. You may use up to

 

32 printable characters (spaces are allowed).

 

 

340

 

MGS-3712/MGS-3712F User’s Guide