Chapter 31 Differentiated Services
Click IP Application > DiffServ in the navigation panel to display the screen as shown.
Figure 153 IP Application > DiffServ
The following table describes the labels in this screen.
Table 91 IP Application > DiffServ
LABEL | DESCRIPTION |
Active | Select this option to enable DiffServ on the Switch. |
|
|
Port | This field displays the index number of a port on the Switch. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. |
| Use this row first to set the common settings and then make adjustments |
| on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Active | Select Active to enable DiffServ on the port. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
| 283 |
|
|