Chapter 12 Filtering
The following table describes the related labels in this screen.
Table 23 Advanced Application > FIltering
LABEL | DESCRIPTION |
Active | Make sure to select this check box to activate your rule. You may |
| temporarily deactivate a rule without deleting it by deselecting this check |
| box. |
|
|
Name | Type a descriptive name (up to 32 printable ASCII characters) for this rule. |
| This is for identification only. |
|
|
Action | Select Discard source to drop the frames from the source MAC address |
| (specified in the MAC field). The Switch can still send frames to the MAC |
| address. |
| Select Discard destination to drop the frames to the destination MAC |
| address (specified in the MAC address). The Switch can still receive frames |
| originating from the MAC address. |
| Select Discard source and Discard destination to block traffic to/from |
| the MAC address specified in the MAC field. |
|
|
MAC | Type a MAC address in valid MAC address format, that is, six hexadecimal |
| character pairs. |
|
|
VID | Type the VLAN group identification number. |
|
|
Add | Click Add to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the Save |
| link on the top navigation panel to save your changes to the |
| memory when you are done configuring. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
Clear | Click Clear to clear the fields to the factory defaults. |
|
|
Index | This field displays the index number of the rule. Click an index number to |
| change the settings. |
|
|
Active | This field displays Yes when the rule is activated and No when is it |
| deactivated. |
|
|
Name | This field displays the descriptive name for this rule. This is for identification |
| purpose only. |
|
|
MAC | This field displays the source/destination MAC address with the VLAN |
Address | identification number to which the MAC address belongs. |
|
|
VID | This field displays the VLAN group identification number. |
|
|
Delete | Check the rule(s) that you want to remove in the Delete column and then |
| click the Delete button. |
|
|
Cancel | Click Cancel to clear the selected checkbox(es) in the Delete column. |
|
|
124 |
| |
| ||
|
|
|