Chapter 17 Link Aggregation
1Make your physical connections - make sure that the ports that you want to belong to the trunk group are connected to the same destination. The following figure shows ports
Figure 85 Trunking Example - Physical Connections
B
A
2Configure static trunking - Click Advanced Application > Link Aggregation > Link Aggregation Setting. In this screen activate trunking group T1, select the traffic distribution algorithm used by this group and select the ports that should belong to this group as shown in the figure below. Click Apply when you are done.
Figure 86 Trunking Example - Configuration Screen
| 163 |
|
|