Chapter 6 Initial Setup Example

1Click Advanced Application > VLAN in the navigation panel and click the Static VLAN link.

2In the Static VLAN screen, select ACTIVE, enter a descriptive name in the Name field and enter 2 in the VLAN Group ID field for the VLAN2 network.

Note: The VLAN Group ID field in this screen and the VID field in the IP Setup screen refer to the same VLAN ID.

3Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to configure port 1 to be a permanent member of the VLAN only.

4To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.

5Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost when the Switch’s power is turned off.

6.1.2Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines.

68

 

MGS-3712/MGS-3712F User’s Guide