Gaggia SUP027YDR manual Description of Parts, Installing the Coffee Maker

ENGLISH

DESCRIPTION OF PARTS

See Fig.01

1Coffee bean container

2Coffee bean container cover (aroma preserver)

3Grinding control knob

4Dose control knob

5Ground coffee doser cover

6Cup Heater

7ON-OFF switch

8Water tank cover

9Water tank

10Coffee grounds drawer

11Power cord

12Drip tray + plate

13Height adjustable coffee dispenser

14Steam / hot water nozzle and pipe

15Front cover

16Steam knob

17Coffee dispenser

18Control panel

19Full tray warning indicator

20Cleaning brush

21Ground coffee measuring scoop

Control panel

22Espresso coffee selector button / Page up in programming mode

23Normal coffee selector button / Page down in programming mode

24“Caffe lungo” selector button / ESC in the programming mode

25Ground coffee selector button

26Hot water selector button

27Descaling selector button

28Programming button /

“OK” in the programming mode

29LCD display

4 INSTALLING THE COFFEE MAKER

For your own safety and the safety of others, follow the “Safety Rules” (see chapter 3).

4.1 Packaging

The original packaging was designed and made to protect the appliance during shipment.

We recommend you keep it for future needs.

4.2 Preliminaries

•Remove the coffee maker from the packaging and position it in a suitable location that meets the requirements specified and described in the safety rules (chap.3).

•Open the machine door, take the drip tray (12) from the package, and fit the dregs box (10); then, fit the drip tray in the machine (Fig.21).

•Make sure that the drip tray and plate (Fig.01, pos. 12), the coffee grounds drawer (10) and the coffee dispenser (17) are fitted correctly and that the front cover (15) is closed.

•Keep the cleaning brush (20) and the ground coffee measuring

scoop (21) supplied with the appliance within easy reach. If the display signals a fault when you switch on the machine, it means that one of the above-described

components has not been properly positioned (Par.16).

4.3 Preparing the coffee maker for use

•Open the water tank cover (Fig.02) and remove the tank (Fig.03). Rinse and fill with fresh potable water (Fig.04); we recommend that you do not exceed the “MAX” level mark. Replace the water tank in its housing and reposition the cover on top.

Always fill the tank (9) with fresh still water. Hot water and other liquids can damage the tank and/or the appliance. Do not operate the appliance without water: make

sure that there is enough water inside the tank.

•Lift the cover (Fig.05) and fill the container with coffee beans (Fig.06).

Use coffee beans only. Ground and instant coffee, as well as other items, will cause damage to the appliance.

•Set the cover back in place on the coffee container (1).

•Insert the plug into the outlet on the back of the coffee machine (Fig.07) after making sure that the on/off switch (7) is set on “O”.

Insert the plug on the other end of the cord into a suitable wall outlet.

• 28 •