Gaggia SUP027YDR manual Dispensing Hot Water, Making coffee with ground coffee

ENGLISH

the display will indicate (for example)

1 SMALL COFFEE

Dispense 1 coffee, place a single cup beneath the coffee spouts and press the button (22, 23 or 24) only once; to dispense 2 coffees, place two cups beneath the coffee spouts and press the button (22,

23 or 24) twice; the display will show:

2 SMALL COFFEES

In this operating mode, the appliance automatically grinds and doses the right quantity of coffee; making two coffees requires two grinding and dosing cycles, which are automatically managed by the machine.

•Then the dispensing cycle starts.

•After undergoing a pre-brewing cycle, coffee will start to come out of the spout (Fig.01, pos.13).

The coffee will stop flowing automatically when the preset level is reached (see section 7.3). You can interrupt the flow of coffee by pressing the button (Fig.01, pos.22 23 or 24).

7.2 Making coffee with ground coffee

In this operating mode, you must use the scoop provided (Fig.01, pos.21) to measure out the

ground coffee.

Only use ground coffee suitable for espresso coffee makers in the doser (5); placing coffee beans, instant coffee and other materials inside the doser causes damage to

the appliance.

Keep fingers away from the ground coffee doser since there are moving parts.

Use the scoop provided (21) to measure out the right quantity of ground coffee to place in the doser .

Use only one full measuring scoop at a time; to make two coffees, you must go through the entire process twice.

• Pressthe button (25) to select the function; the display will show

SELECT PRODUCT

PREGROUND COFFEE

•Lift the cover of the ground coffee doser (Fig.13).

•Fill the scoop with one measure of coffee; discard any excess ground coffee.

•Fill the doser with the ground coffee (Fig.14)

•Close the cover of the ground coffee doser.

•To dispense coffee, press the coffee dispenser button (22, 23 or 24); the display will show (for example)

1 SMALL COFFEE PREGROUND COFFEE

•The dispensing cycle will start.

•After undergoing a pre-brewing cycle, coffee will start to come out of the spout (13).

The coffee will stop flowing automatically when the preset level is reached (see section 7.3). You can interrupt the flow of coffee by pressing the button (22 23 or 24).

•Subsequently the machine will automatically switch back to the normal operating mode (see section 7.1).

7.3Adjusting the quantity of coffee per cup

The machine has been programmed to dispense 3 types of coffee: espresso coffee with button 22, normal coffee with button 23 and “caffe lungo” with button 24.

To adapt the programmed settings to the size of your cups, place a cup beneath the coffee spouts (13), press the dispenser button corresponding to the kind of coffee you want (22, 23 or 24) and keep it pressed down; the display will show (for example):

1 COFFEE PROGR. QUANTITY

Wait for the cup to fill to the desired level and release the button.

Note: keep the button (23) or (24) pressed during the entire coffee dispensing process.

In this way, the appliance is programmed to dispense the quantity of coffee you selected.

8 DISPENSING HOT WATER

Caution: splashing may occur at the start – scalding hazard! The hot water nozzle and pipe can reach high

temperatures: avoid touching directly with your hands.

•Before attempting to dispense hot water, make sure that the display shows.

SELECT PRODUCT

READY FOR USE

When the machine is ready to dispense coffee, carry out the following steps.

• 30 •