Chapter 3 Hardware Overview
3The Switch automatically detects the installed transceiver. Check the LEDs to verify that it is functioning properly.
4Close the transceiver’s latch (latch styles vary).
5Connect the fiber optic cables to the transceiver.
Figure 10 Transceiver Installation Example
Figure 11 Connecting the Fiber Optic Cables
3.1.3.2 Transceiver RemovalUse the following steps to remove a
1Remove the fiber optic cables from the transceiver.
2Open the transceiver’s latch (latch styles vary).
| 37 |
|
|