Chapter 24 Multicast
24.5 IGMP Filtering Profile
An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are able to join. A profile contains a range of multicast IP addresses which you want clients to be able to join. Profiles are assigned to ports (in the Multicast Setting screen). Clients connected to those ports are then able to join the multicast groups specified in the profile. Each port can be assigned a single profile. A profile can be assigned to multiple ports.
Click Advanced Applications > Multicast > Multicast Setting > IGMP Filtering Profile link to display the screen as shown.
Figure 108 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
The following table describes the labels in this screen.
Table 62 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
LABEL | DESCRIPTION |
Profile Name | Enter a descriptive name for the profile for identification purposes. |
| To configure additional rule(s) for a profile that you have already |
| added, enter the profile name and specify a different IP multicast |
| address range. |
|
|
Start Address | Type the starting multicast IP address for a range of multicast IP |
| addresses that you want to belong to the IGMP filter profile. |
|
|
End Address | Type the ending multicast IP address for a range of IP addresses that |
| you want to belong to the IGMP filter profile. |
| If you want to add a single multicast IP address, enter it in both the |
| Start Address and End Address fields. |
|
|
212 |
| |
| ||
|
|
|