Chapter 8 Basic Setting
Table 11 Basic Setting > IP Setup (continued)
LABELDESCRIPTION
You can create up to 64 IP addresses, which are used to access and manage the Switch from the ports belonging to the
IP Address | Enter the IP address for managing the Switch by the members of the |
| VLAN specified in the VID field below. |
|
|
IP Subnet Mask | Enter the IP subnet mask in dotted decimal notation. |
|
|
VID | Type the VLAN group identification number. |
|
|
Default Gateway | Enter the IP address of the default outgoing gateway in dotted |
| decimal notation. |
|
|
Add | Click Add to insert the entry to the summary table below and save |
| your changes to the Switch’s |
| these changes if it is turned off or loses power, so use the Save link |
| on the top navigation panel to save your changes to the |
| memory when you are done configuring. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
Index | This field displays the index number of the rule. Click an index |
| number to edit the rule. |
|
|
IP Address | This field displays the IP address. |
|
|
IP Subnet Mask | This field displays the subnet mask. |
|
|
VID | This field displays the ID number of the VLAN group. |
|
|
Default Gateway | This field displays the IP address of the default gateway. |
|
|
Delete | Check the management IP addresses that you want to remove in the |
| Delete column, then click the Delete button. |
|
|
Cancel | Click Cancel to clear the selected checkboxes in the Delete column. |
|
|
90 |
| |
| ||
|
|
|