Chapter 4 Tutorials
5Click Apply to save your changes back to the
Figure 31 Tutorial: Set DHCP Server and Relay Information
6Click the Save link in the upper right corner of the web configurator to save your configuration permanently.
7The DHCP server can then assign a specific IP address based on the DHCP request.
4.2.4Troubleshooting
Check the client A’s IP address. If it did not receive the IP address 172.16.1.18, make sure:
1Client A is connected to the Switch’s port 2 in VLAN 102.
2You configured the correct VLAN ID, port number and system name for DHCP relay on both the DHCP server and the Switch.
3You clicked the Save link on the Switch to have your settings take effect.
54 |
| |
| ||
|
|
|