REDUNDANCY IN THE
7 COREBUILDER 7000 FAMILY ATM
SWITCH
This chapter describes redundancy in the CoreBuilderTM 7000 family ATM switch. The operation of each redundant device is described. For information on installing redundant devices, see Chapter 4.
This chapter includes the following topics:
Redundant Power Supply
Redundant Switching Module
Redundant Power Supply
Types of Power
Supplies
This section discusses the following topics:
Types of power supplies available
Power requirements of the CoreBuilder 7000 family switching and
interface cards
Using redundant switching cards and redundant power supplies.
The CoreBuilder 7000 family supports three kinds of power supplies: an AC unit rated at 90A, and two DC units rated at 90A and 40A. You can use each one of them in any CoreBuilder 7000 family ATM switch. The power supply supports two output channels: one 5V DC channel which supplies the CoreBuilder switch and the interfaces cards, and one 12V DC channel which supplies the fans.
The CoreBuilder 7000 family power supplies are shown in Table
Table
|
| 3Com |
Power Supply | Current | Number |
|
|
|
CoreBuilder 7000/7000HD AC Power Supply | 90A | 3C37010A |
CoreBuilder 7000/7000HD DC Power Supply | 90A | 3C37027 |
|
|
|