2
UNPACKING INSTRUCTIONS
| This chapter describes how to unpack the CoreBuilderTM 7000 family |
| ATM switch and contains the following topics: |
| Unpacking the CoreBuilder 7000 Family ATM Switch. |
| Taking Inventory |
|
|
Unpacking the | Before unpacking the CoreBuilder 7000 family ATM switch, examine it |
CoreBuilder 7000 | carefully for any signs of damage. After unpacking the system as |
Family ATM Switch | described below, you may begin the appropriate installation procedure in |
| Chapter 3. |
| If there are any visible signs of damage to the system packaging, do not |
| begin installation. Contact 3Com Technical Support or your distributor for |
| assistance. |
| To unpack the CoreBuilder 7000 family ATM switch, follow these |
| instructions: |
1Remove the clips that attach the shipping container to the shipping tray of the packaging. The clips are located on opposite sides of the shipping container (two per side).
2Slowly lift the shipping container off the shipping tray. The device is now visible.
3Remove the accessory box and the mounting brackets from the top foam. The mounting brackets are recessed into the foam.
4Lift the top foam off the device.
5Two persons are required for this step. With each person grasping the