3Com DUA3700-0BAA04 manual Loading Software, and Configuration, Data by Batch, Utilities

Loading Software and Configuration Data by Batch Utilities 6-29

	(1) SYS:\ (3) LOA: \(1) STS
	The download status is displayed as follows:
	Load process completed successfully.
	The status will be success only if all the files were successfully loaded. In
	case of failure to load a file, the “load all” process will be stopped
	without continuing to the next file, a failure indication is displayed, and
	the display status option will display the error message:
	General Error occurred while loading
Loading Software	This section describes an alternative to the method of the previous
and Configuration	section: RS-232 batch-file utilities you can use to download and upload
Data by Batch	the executable software and the system configuration parameters for the
Utilities	CoreBuilder 7000 family ATM switch to an external disk via the RS-232
	service port. It contains the following topics:
	Batch Upload/Download Utilities
	Batch Downgrade Utilities
	￿Running a Batch File
	Returning to Operational Mode

Batch

Upload/Download

Utilities

This ability allows you to easily restore the configuration to a switch which has failed or to configure a new switch with a standard configuration stored on disk.

The utility is performed by running the appropriate batch file via the RS-232 service port.

Table 6-5 shows the utilities and the batch file names.

Table 6-5Utilities for Upload/Download

Utility	Batch file name
General flash utility	fls_utl.bat
Format all configuration parameters groups in flash	cfgfrmat.bat
memory according to the mapping of version 4.0
Upload all configuration parameters groups from the	cfg_upld.bat
switch engine flash memory to PC file