3Com DUA3700-0BAA04 manual Conventions, Icon Description, Convention Description

2ABOUT THIS GUIDE

Table 1 Information in this Guide (continued)

How to use the Fast Setup procedure	Chapter 6
Installing a redundant power supply	Chapter 7
Installing a redundant switching module	Chapter 7
How to troubleshoot your system	Chapter 8
Hardware and protocol specifications	Appendix A
Safety information	Appendix B
Site Requirements	Appendix C
Getting technical support	Appendix D

Conventions	Table 2 and Table 3 list conventions that are used throughout this guide.
	Table 2	Notice Icons
	Icon	Notice Type	Description
		Information note Information that describes important features or
			instructions
		Caution	Information that alerts you to potential loss of data or
			potential damage to an application, system, or device
		Warning	Information that alerts you to potential personal injury
	Table 3	Text Conventions
	Convention		Description
	Screen displays		This typeface represents information as it appears on the
			screen.
	Syntax		The word “syntax” means that you must evaluate the syntax
			provided and then supply the appropriate values for the
			placeholders that appear in angle brackets. Example:
			To enable RIPIP, use the following syntax:
			SETDefault !<port> -RIPIP CONTrol =
			Listen
			In this example, you must supply a port number for <port>.
	Commands		The word “command” means that you must enter the

command exactly as shown and then press Return or Enter. Commands appear in bold. Example:

To remove the IP address, enter the following command:

SETDefault !0 -IP NETaddr = 0.0.0.0