3Com DUA3700-0BAA04 manual To enter the interface type configuration

Models: DUA3700-0BAA04

1 142
Download 142 pages 41.9 Kb
Page 66
Image 66
To enter the interface type configuration:

6-12CHAPTER 6: CONFIGURING THE COREBUILDER 7000 FAMILY ATM SWITCH

Interface Type Section This section prompts you for the ATM interface type configuration of the ports on the Interface Modules which are installed in the CoreBuilder 7000 family ATM switch chassis.

There are three interface types: UNI, E-IISP and IISP. The UNI type is normally used when an edge device is connecting to a switch, the E-IISP type is normally used when connecting to another CoreBuilder 7000 or 9000 switch, and the IISP type is used to connect to a device which does not recognize the E-IISP protocol used by the CoreBuilder 7000 family ATM switch such as switches of other vendors.

To enter the interface type configuration:

1At the NNI type of port prompt, enter the NNI type for the port you just specified. Enter “U” for UNI, enter “E” for IISP, or enter “I” for IISP.

2Repeat step 2 until you have specified the interface type for all of the ports that are in the Corebuilder 7000 family ATM switch chassis.

Interface type =-------------

NNI type of port <3.1> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.2> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.3> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.4> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.5> (U<NI>, E<IISP>, I<ISP>): E

NNI type of port <3.6> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.7> (U<NI>, E<IISP>, I<ISP>): U

NNI type of port <3.8> (U<NI>, E<IISP>, I<ISP>): U

Page 66
Image 66
3Com DUA3700-0BAA04 manual To enter the interface type configuration