3Com DUA3700-0BAA04 manual FST Fast Setup, The following message appears on the screen

Integrated Fast Setup 6-7

To begin the Integrated Fast Setup process, select the menu item:

(9) FST: Fast Setup

Note that the Integrated Fast Setup “Full” setup mode may override any specific configurations that have previously been carried out in any of the installed interface cards (see “Setup Modes” on page 6-4). The following warning message is displayed when this is about to occur:

***Note: Full fast setup, special module configuration will be overridden.

The following message appears on the screen.

Now reading the modules configuration, please wait ...

Special module configuration will be overridden by fast setup.

continue full fast setup or only switch fast setup (S<witch>, F<ull>): F

***Note: Full fast setup, special module configuration will be overridden.

Fast Setup Utility

==================

The flash configuration will be displayed below;

Update if needed, and then hit Enter.

To move		between	sections, enter the following				characters at end of line:
< >	-	Back and forth in sections			>S	-	Jump to section ID S
\	-	Back to	beginning of setup		$	-	To end of setup
Only in Virtual			Network Configuration section				(group=slot; item=port):
}G	-	Jump to	group #G		+I	-	Jump to item #I
*	-	Update all group		items	**	-	Update all section items
.T	-	Assign a VLT tag		#T