5Orient the power supply so its labelling is upright.
6Insert the power supply into the chassis by placing it between the guides of the slot and sliding it until it stops.
7Tighten the power supply’s securing screws.
8Connect the power cord to the power supply.
Inserting the power supply
| Figure |
|
|
Switch Module | The CoreBuilder 7000 family ATM switch provides for a redundant switch |
| module to ensure continued operation should the main switch module |
| fail. For more information on the operation of the redundant switch |
| module, see “Redundant Switching Module” on page |
| This section includes the following topics: |
| Installing a Switch Module |
| Replacing a Switch Module |
| Setting up Switch Module Redundancy |
| Setting up Switch Module Hardware Redundancy |
| Setting up Switch Module Redundancy and LANE Redundancy |