3Com DUA3700-0BAA04 manual Repeat until you have specified all the IISP ports

Integrated Fast Setup 6-13

3The LMA automatically prompts you to enter ATM addresses for the ports that you have specified as IISP. These are ATM addresses of network devices that you want the IISP port to recognize for routing purposes. They are placed in the routing table of the port. You need to enter these addresses manually because the IISP protocol does not automatically recognize them. You can enter more than one address; press Enter to end the sequence of addresses.

***The following are addresses of ports you have defined as IISP. You may enter more than one address per port.

When you have finished press <Enter>:

ATM address for port <5.2> (19 bytes-When less: end with '.*'): 47.00.00.00.00.00.3e.00.00.b0.00.c0.da.69.11.22.00000000c0.da.11.22.00

ATM address was set for port <5.2>

ATM address for port <5.2> (19 bytes-When less: end with '.*'): 47.00.00.00.00.00.3e.00.00.b0.00.00.00.00.c0.da.11.22.0033

ATM address was set for port <5.2>

ATM address for port <5.2> (19 bytes-When less: end with '.*'):

4The LMA automatically prompts you for the NNI type of the ports that you have specified as IISP. Specify the NNI type as User or Network.

***The following is a profile of ports you have defined as Gateway: Profile of port <5.2> (U<ser>, N<etwork>): N

5Repeat until you have specified all the IISP ports.