FastBUS Configuration Section This section prompts you to configure the FastBUS module. If no FastBUS module is installed, this section is skipped by the Integrated Fast Setup.
To configure the FastBUS:
1At the prompt, enter 1 to enable the FastBUS module or enter 0 to disable it.
2At the prompt, enter a number in the range
Options:
The factory default is 4.
Your choice is displayed.
3As in step 2, select the capacity of Bank 2.
4For each of the 16 resident ELANs, enter a number in the range
Options: 0 - Conventional
1 - Bank 1 (1*60MB/s)
2 - Bank 2 (1*60MB/s)
The factory default is 0.
Your choices are displayed.
The following is an example of the FastBUS configuration.