Chapter 2 Hardware Installation and Connection

2.3.3Mounting the Switch on a Rack

1Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining up the two screw holes on the bracket with the screw holes on the side of the rack.

Figure 7 Mounting the Switch on a Rack

2Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack.

3Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack.

32

 

MGS-3712/MGS-3712F User’s Guide