Chapter 7 WAN Setup

Figure 53 More Connections Edit

The following table describes the labels in this screen.

Table 26 More Connections Edit

LABEL

DESCRIPTION

 

 

General

 

 

 

Active

Select the check box to activate or clear the check box to deactivate this node.

 

 

Name

Enter a unique, descriptive name of up to 20 characters for this node. You can

 

use alphanumeric characters and the hyphen “-”, underscore “_” and @.

General

 

 

 

Mode

Select Routing from the drop-down list box if your ISP allows multiple computers

 

to share an Internet account.

 

If you select Bridge, the ZyXEL Device will forward any packet that it does not

 

route to this remote node; otherwise, the packets are discarded.

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down list

 

box. Choices are PPPoA, RFC 1483, ENET ENCAP or PPPoE.

User Name

(PPPoA and PPPoE encapsulation only) Enter the user name exactly as your

 

ISP assigned. If assigned a name in the form user@domain where domain

 

identifies a service name, then enter both components exactly as given.

Password

(PPPoA and PPPoE encapsulation only) Enter the password associated with the

 

user name above.

 

111

P-2602HWLNI User’s Guide