Chapter 12 VoIP Trunking
Figure 125 VoIP > Trunking > Call Rule
Each field is described in the following table.
Table 84 VoIP > Trunking > Call Rule
LABEL | DESCRIPTION |
# | This is a |
|
|
Pattern | A Pattern is used when you call your ZyXEL Device from a PSTN phone and want |
| to use it to create a VoIP link to a remote peer device which will forward the call to |
| a PSTN phone. |
| A Pattern is a string of digits your ZyXEL Device uses to determine whether or not |
| to send the call to a peer VoIP device. For example, if you want to use trunking to |
| call phone numbers which start with the number “555”, then enter 555 in this field. |
| Enter up to 32 numeric characters. |
| If the number you dial does not match any of the patterns you configured, then you |
| can still use your ZyXEL Device to forward calls to VoIP phones. Simply dial the |
| SIP number of the VoIP phone you want to call. |
|
|
Account | Select the outgoing authentication account you set up in the Peer Call screen. |
| This account is used to direct your call to the correct remote peer device and to |
| authenticate you. |
| Select None to disable this forwarding rule. |
|
|
Apply | Click this to apply your settings to the ZyXEL Device. |
|
|
Cancel | Click this to reset the fields. |
|
|
218 |
| |
| ||
|
|
|