Chapter 11 Voice

If you have another call, press the flash key and then “2” to switch back and forth between caller A and B by putting either one on hold.

Press the flash key and then “0” to disconnect the call presently on hold and keep the current call on line.

Press the flash key and then “1” to disconnect the current call and resume the call on hold. If you hang up the phone but a caller is still on hold, there will be a remind ring.

11.14.2.2 European Call Waiting

This allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number.

If there is a second call to a telephone number, you will hear a call waiting tone. Take one of the following actions.

•Reject the second call.

Press the flash key and then press “0”.

•Disconnect the first call and answer the second call.

Either press the flash key and press “1”, or just hang up the phone and then answer the phone after it rings.

•Put the first call on hold and answer the second call. Press the flash key and then “2”.

11.14.2.3European Call Transfer

Do the following to transfer an incoming call (that you have answered) to another phone.

1Press the flash key to put the caller on hold.

2When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the call.

3After you hear the ring signal or the second party answers it, hang up the phone.

11.14.2.4European Three-Way Conference

Use the following steps to make three-way conference calls.

1When you are on the phone talking to someone, press the flash key to put the caller on hold and get a dial tone.

2Dial a phone number directly to make another call. If you want to have the call use a certain interface (SIP, PSTN or ISDN), enter the SIP, PSTN or ISDN prefix number first.

3When the second call is answered, press the flash key and press “3” to create a three-way conversation.

4Hang up the phone to drop the connection.

5If you want to separate the activated three-way conference into two individual connections (one is on-line, the other is on hold), press the flash key and press “2”.

11.14.3USA Type Supplementary Services

This section describes how to use supplementary phone services with the USA Type Call Service Mode. Commands for supplementary services are listed in the table below.

196

 

P-2602HWLNI User’s Guide