Chapter 11 Voice
After pressing the flash key, if you do not issue the
Table 71 USA Flash Key Commands
COMMAND | DESCRIPTION | |
Flash |
| Put a current call on hold to place a second call. After the second |
|
| call is successful, press the flash key again to have a |
|
| conference call. |
|
| Put a current call on hold to answer an incoming call. |
|
|
|
Flash | *98# | Transfer the call to another phone. |
|
|
|
11.14.3.1 USA Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key to switch back and forth between caller A and B by putting either one on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.
11.14.3.2 USA Call Waiting
This allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number.
If there is a second call to your telephone number, you will hear a call waiting tone. Press the flash key to put the first call on hold and answer the second call.
11.14.3.3 USA Call Transfer
Do the following to transfer an incoming call (that you have answered) to another phone.
1Press the flash key to put the caller on hold.
2When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the call.
3After you hear the ring signal or the second party answers it, hang up the phone.
11.14.3.4USA
Use the following steps to make
1When you are on the phone talking to someone (party A), press the flash key to put the caller on hold and get a dial tone.
2Dial a phone number directly to make another call (to party B). If you want to have the call use a certain interface (SIP, PSTN or ISDN), enter the SIP, PSTN or ISDN prefix number first.
3When party B answers the second call, press the flash key to create a
4Hang up the phone to drop the connection.
5If you want to separate the activated
6If you want to go back to the
| 197 |
|
|