Chapter 9 Wireless LAN
Figure 84 Wireless LAN > WDS
The following table describes the fields in this screen.
Table 47 Wireless LAN > WDS
LABEL | DESCRIPTION | |
Remote Bridge MAC Address | ||
|
| |
# | This is the index number of the individual WDS link. | |
|
| |
Active | Select this to activate the link between the ZyXEL Device and the peer device | |
| to which this entry refers. When you do not select the check box this link is | |
| down. | |
|
| |
MAC Address | Type the MAC address of the peer device in a valid MAC address format, six | |
| hexadecimal character pairs, 12:34:56:78:9a:bc, for example. | |
|
|
|
Security |
|
|
|
| |
Security Mode | Select one of the security settings. | |
| • | No Security |
| • | Static WEP |
| • | |
| • | |
| If you select No Security, the data sent between APs is not encrypted. | |
| Anyone can read it. See the following sections for more information. | |
| Note: Other APs must use the same encryption method on |
| security settings to enable WDS security. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to return to the previous screen. |
Choose Static WEP from the Security Mode list.
| 149 |
|
|