Chapter 13 Phone Usage

Remote setting (when you are at another place):

When you hear the dial tone, dial “*04” followed by your extension number.

When you do not need the follow me function, dial “#04” followed by your extension number to cancel this rule.

13.3.5Call Pickup

When an incoming internal call rings but the user of the phone is unavailable to receive the call, you can pick the phone up for this person.

Take the following steps to receive incoming internal calls from your phone.

1If the ringing phone does not belong to the same group of your phone but you know its extension number, press “*97#” followed by the extension number of the ringing phone to receive the call.

2If the ringing phone belongs to the same group of your phone, press “*97#” to receive the call.

13.4Checking the Device’s IP Address

Do the following to listen to the ZyXEL Device’s current IP address.

1Pick up your phone’s receiver.

2Press “****” on your phone’s keypad and wait for the message that says you are in the configuration menu.

3Press “5” followed by the # key.

4Listen to the IP address and make a note of it.

5Hang up the receiver.

13.5Auto Firmware Upgrade

During auto-provisioning, the ZyXEL Device checks to see if there is a newer firmware version. If newer firmware is available, the ZyXEL Device plays a recording when you pick up your phone’s handset.

Press “*99#” to upgrade the ZyXEL Device’s firmware. Press “#99#” to not upgrade the ZyXEL Device’s firmware.

 

229

P-2602HWLNI User’s Guide