Chapter 11 Voice
11.11 Common Phone Settings Screen
Use this screen to activate and deactivate immediate dialing and set up call fallback. To access this screen, click VoIP > Phone > Common.
Figure 108 Phone > Common
Each field is described in the following table.
Table 67 Phone > Common
LABEL | DESCRIPTION |
Immediate Dial |
|
|
|
Active Immediate | Select this if you want to use the pound key (#) to tell the ZyXEL Device to make |
Dial | the phone call immediately, instead of waiting the number of seconds you selected |
| in the Dialing Interval Select in VoIP > Phone > Analog Phone. |
| If you select this, dial the phone number, and then press the pound key. The |
| ZyXEL Device makes the call immediately, instead of waiting. You can still wait, if |
| you want. |
|
|
Call Fallback |
|
|
|
Force to PSTN if | Select this to have the ZyXEL Device redirect outgoing calls to the PSTN |
SIP unregistered | connection if there are no SIP accounts registered on the ZyXEL Device. |
| When you try to make a SIP call, but no SIP account is registered, the ZyXEL |
| Device uses the phone line connected to the PSTN port to make the call. |
|
|
Force to SIP if | Select this to have the ZyXEL Device redirect outgoing calls to the registered SIP |
PSTN unplugged | account if the ZyXEL Device is not connected to the PSTN network. |
| When you try to make a PSTN call, but the PSTN port on the ZyXEL Device is |
| unplugged, the ZyXEL Device uses the phone port’s registered SIP account to |
| make the call. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
11.12 Ext. Table
You can assign extension numbers to phones connected to the ZyXEL Device, and make internal calls between these phones. For information on making internal calls, refer to Section 13.3 on page 227.
| 191 |
|
|