Chapter 29 Tools

Figure 242 Reset In Process Message

You can also press the RESET button on the rear panel to reset the factory defaults of your ZyXEL Device. Refer to Section 1.6 on page 47 for more information on the RESET button.

29.6 Restart

System restart allows you to reboot the ZyXEL Device without turning the power off.

Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This does not affect the ZyXEL Device's configuration.

Figure 243 Restart Screen

29.7 Using FTP or TFTP to Back Up Configuration

This section covers how to use FTP or TFTP to save your device’s configuration file to your computer.

29.7.1 Using the FTP Commands to Back Up Configuration

1Launch the FTP client on your computer.

2Enter “open”, followed by a space and the IP address of your ZyXEL Device.

3Press [ENTER] when prompted for a username.

4Enter your password as requested (the default is “1234”).

5Enter “bin” to set transfer mode to binary.

6Use “get” to transfer files from the ZyXEL Device to the computer, for example, “get rom-0 config.rom” transfers the configuration file on the ZyXEL Device to your

 

413

P-2602HWLNI User’s Guide