ZyXEL Communications P-2602HWLNI 9.5.3 WPA(2)-PSK

Chapter 9 Wireless LAN

Figure 70 Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

Table 38 Wireless: Static WEP Encryption

LABEL	DESCRIPTION
Security Mode	Choose Static WEP from the drop-down list box.

Passphrase	Enter a Passphrase (up to 32 printable characters) and click Generate. The ZyXEL
	Device automatically generates a WEP key.

WEP Key	The WEP key is used to encrypt data. The ZyXEL Device and all the wireless APs
	must use the same WEP key for data transmission.
	If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII
	string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 40/64-bit, 128-bit or
	256-bit WEP key respectively.

9.5.3 WPA(2)-PSK

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless LAN to display the General screen. Select WPA-PSKor WPA2-PSKfrom the Security Mode list.

136
136	P-2602HWLNI User’s Guide